Some tips for the construction of a wooden house
After the wooden cottage is built, the entire construction will give a precipitate. That is why in the process of installing the doors you need to take into account these features, otherwise this will certainly affect the further performance of the entrance group.
In order not to encounter problems, you should develop the right approach to construction at the time of reinforcement of the foundation. It is impossible to use different waste for this, as well as scrap metal. The uneven shrinkage of the cottage on this basis provoke the emergence of a number of difficulties, namely: a change in the shape of the openings, improper thermal insulation.
At the stage of installation of the foundation, equipment such as concrete pump, which can be purchased or rented, will certainly be needed. It is worth determining in advance where exactly the opening will be, this should be done even before the process of erecting walls, which is necessary to establish more than the openings of a larger number. Iron doors are not allowed to be installed in an opening that is not strengthened, but made in the wall. Thanks to the casing process, it is possible to avoid deformation of the openings, which occurs during the shrinkage and operation of the building.
The openings can be planted during the construction of the walls and after their construction. In order to carry out the casing of the doorway, you should make spikes according to its verticals. After you need to take two timber, which have the desired cross -section, and use them as vertical supports. It is worth noting that their length should be no less than the height of the opening. On the bars, the longitudinal groove should be made along the length, and then you need to attach them to the spikes. But to consolidate the bars using nails, it is prohibited.