First of all, it should be noted that for installing the suspended ceiling amstrong, no special knowledge or skills are required independently. Almost every home master in a state to cope with installation on their own. It should also be noted that such ceilings are great for any room, both for a house or apartment, so for an office or store.
The first step that must be performed immediately before starting work is the measurement and calculation of all surfaces. Firstly, all surface axes should be noted.
Secondly, accurately determine the required number of plates that will be needed with their symmetrical location from the center along all axes. You also need to determine the size of the plates that will be located at the edges. After that, you need to determine the place where the ventilation grilles and lamps will be located. At the same time, it is necessary to remember that the ceiling should be from the ceiling overlap at a distance of 15-17 centimeters. Then, with the help of a marker and a special level, marking the place on which the frame will be attached.
After that, you need to take the corner profile. This profile is cut at an angle of 45 degrees in those places where there will be joints. In this case, special scissors for metal should be used. After that, already prepared profiles are attached, focusing on the marking line. In the process of installing the suspended ceiling Armstrong, it is necessary to take into account the fact that in no case the suspended knitting needles should be below the already attached profile. They can be cut if there is a need for this. Note that the distance between the suspensions should be at least 1.2 meters, and the distance from the extreme knitting needles to the wall should be 0.6 meters.
After this stage of work is completed, you should begin the next. It is necessary to fix the supporting profiles on the suspensions so that their edges are located on the so -called wall corners. If necessary, the profiles can be removed. In order to attach the missing part, you should use a special lock. After that, in the process of adjustment using springs, it is necessary to align all profiles along the horizontal line.
Then the transverse profile l 1200 with the guide profile should be connected. To do this, you need special key slots and locks. In this case, the castle is placed in the left part of the slot itself and closed. It should also be noted that during the installation of transverse profiles, it is necessary to withstand the step, which is 60 centimeters. In order to completely collect the suspended ceiling Armstrong, the profiles l 1200 should also be connected to each other. In this case, you need to take the profile l 600. After that, there must be a certain frame in the form of a grille, each cell of which should be 60×60 centimeters.
At the final stage, the installation of the suspended ceiling Armstrong must be cut out special holes for ventilation grilles and lamps. After that, it is necessary to place the plates directly into the cells of the prepared frame, based on the direction of the arrows, which are located on the back.
As a result, it should be noted the fact that knowing the specifics of the installation of the suspended ceiling Armstrong, it is quite easy to do it yourself without resorting to the help of specialists.
Video on the topic: