Radiator painting has a certain procedure for work, as, in principle, other finishing and construction work.
Remember that it is forbidden to paint a hot or heated radiator. If you want to paint the battery in the heating period, then it should be disconnected from the heating system and wait until it cools down. At the same time, you need to carefully examine the layer of paint in which the heating radiator was previously painted. You can apply paint directly to the coating if the surface is smooth, without cracks and bloating, as well as other defects. In another case, the paint should be removed by mechanically or using special chemical flush.
Modern softeners of the old paint do not contribute to corrosion of ferrous and non -ferrous metals, act equally effectively for the destruction of colors on any basis and successfully help to quickly cope with multi -layer violence. Washing should be applied to a dry surface with a brush, and then envelop the radiator for 1 hour in a polyethylene film. After that, the paint can be removed with a knife, spatula or chisel. If necessary, you can wash it. После этого поверхности затирается мелкой тёркой и обезжиривается растворителем.
After that, the batteries can be painted. When choosing a paint, keep in mind that it should have a heat resistance of at least 100 degrees and when heated not to secrete toxic substances, to be resistant to household chemicals and abrasion. The corresponding type of primer should be selected for the paint. The latter should be applied over the entire surface of the radiator with a dry painting brush.
After applying the primer, they begin to paint the radiator from the inner surfaces, after which the upper surfaces are painted from top to bottom. It is better to apply two thin layers of paint than one thick. The new battery should be cleaned before painting with paper and degreased with a solvent, and then proceed to staining.
You can skip the recording and leave a comment. Link placement is prohibited.