It’s already scary to look at the old floor, but it remains very expensive to change it. You can invite the master, you want to save and do it yourself take a cycle machine in the construction market rental. Consider this work, this dusty is better to put on a respirator right away. When cycles of the floorboard, they follow the car along the fibers, in no case across, because otherwise the wood fiber will puff and will have to carry out a lot of work on its further extinguishing.
The top layer needs to be removed with a large skin with grain 80, the main rule of the machine should always be in motion, stop the hole. The car is not suitable close to the wall, so the corners will have to be treated manually. Attention all wood dust after work must immediately take them out into the street. If the floor was already covered with varnish and we fed it, then the old dust that was in the park will enter the interaction with the new one and the bag may be ignited. In no case should not be left overnight.
Now let’s polish the floor with a small skin, the surface will become perfectly smooth. It is very important thoroughly propolis gender, if the sorcerers remain on it, the varnish will not lie evenly. By the way, there are 2 types of varnish first acrylic, on the basis of water, it almost does not smell like this easily applied to them quickly dry. The varnish for the first layer should be diluted with water, because if it is not diluted with water, it will be too thick, it will be inconvenient to work with it. The varnish for the next layers does not just need to be covered 3-4 times, each layer should dry 6-8 hours. The second option alkyd varnish smells of course, but it will last longer. The varnish for the first layer also needs to be diluted, but not with water, but White Spirit. You need to dry it for longer than 1 day.
You can also watch video instructions
You can skip the recording and leave a comment. Link placement is prohibited.