How to get rid of mold on the walls, not everyone knows, but the problem can be touched by literally everyone. Modern building materials largely contribute to the creation of conditions ideal for the appearance of molds, therefore it is best to carry out preventive work during the repair. However, not the time of prevention, when an ill -fated mold has already appeared on the walls – here to start the struggle with it at the time. Before you decide to take any actions, it is advisable to find out the causes of mold, or rather the cause of increased humidity in the room, because it is because of this that the malicious fungus appears in ninety-nine cases out of one hundred.
Sometimes there is enough physical removal of mold and regular ventilation of the room to get rid of this misfortune. However, most often the problem requires a more professional approach.
Ways to get rid of mold
One of the most reliable ways to get rid of mold is external insulation of the walls of the apartment or house. Typically, the reason for the creation of favorable conditions for the development of the fungus is that the so -called dew point is located closer to the inner edge of the wall, and not the external. The result is condensation and humidity increases. Unfortunately, there is usually no way to insulate the walls on the outside independently, since this procedure is a type of high -rise work that the appropriate specialist should perform. Therefore, we will not dwell on this and we will only clarify that the cheapest and most effective material for external wall insulation is foam.
In addition to wall insulation work, it is advisable to do antifungal treatment from the outside. Such a repair is quite realistic and with your own hands. You should not dwell on the physical removal of mold, since the effect of this is likely to be temporary. After the walls are cleaned up, we recommend going to the nearest construction store and buy any antiseptic there, of which you will usually be able to offer a great many. Many funds, by the way, will help to remove mold at the same time and prevent its appearance in the future, and this is not a little important.
Unfortunately, sometimes mold penetrates too deep and you have to remove the entire layer of plaster. On the one hand, this is a time -consuming process, but on the other, you can also find pluses, because during a putty you can apply a waterproofing mixture, which is an excellent preventive agent against the appearance of mold. Nevertheless, all efforts will be in vain if the humidity in the room is still increased, therefore do not forget to regularly ventilate it, opening the windows for at least ten minutes daily.