With your own hands alignment
One of the most responsible and difficult moments of aligning the ceiling foundation on its own is its preliminary quality preparation. Of course, the ceiling can be excellently aligned and painted, but the joy of such a repair can be reduced from if it literally begins to crack in a couple of weeks, and the plaster will literally fall on the head. To align the ceiling, you will need metal spatula with a sharpener, a roller (or brush), a sponge or a clean rag, a construction film and warm water.
The spatula must be tapped to the state of the usual knife. In the future, this tool will be used to perform the main work. Do not take very wide spatula, because due to the fact that the pressure will be distributed to a large area, you will need to make much more effort. To create a positive mood, you can go to the site
To concrete slabs, you need to scrape the layers of old plaster, as well as paints or whitewashing. Since this work is very difficult, to prepare one room can leave for one or two days. With particular thoroughness, you need to clean the joints with the walls and seams of the plates. Since the spatula often needs to be undermined, there should always be a beam on hand.
The remaining whitewash should be moistened with warm water and washed off with a rag or sponge. In order not to smear lime on the ceiling, water should be changed often. After the ceiling is completely dry, it must be treated with a primer through a roller or brush.
Particular attention should be paid to the corners and seams – in this option it is impossible to do without a brush.