How to stick tiles in the kitchen

by eco-economic

For repair work in the kitchen, you should choose materials that have high moisture resistance and heat resistance indicators. Quite often for wall decoration between the countertop and hinged kitchen cabinets, tiles are used. It does not heat up even a prolonged exposure to high temperatures. And when exposed to temperatures, does not produce deformation. High-quality tiles for the kitchen in Moscow at competitive prices are offered in the salon-store “Tiles & Steps “, details on the official website of the store /

Its use is especially effective near the cooking place and washing. A significant advantage of tiles as a finishing material is its unpretentiousness in operation. Not much difficulties to clean the tile from scale and fat. At the same time, the texture of the finishing material will not suffer.

Tiles can be of a variety of colors and textures, therefore it is not difficult to choose a style that will fit into the general surroundings of the kitchen as harmoniously as possible. In some cases, tiles can be used even as a bright accent in the interior, if you choose bright textures and pictures.

It is easiest to fix the tile on the wall using special tile glue. This is not at all difficult, so you can even do it alone.

For a partial pasting walls of the tiles, it is necessary to begin to remove the completely existing finish on the walls. Further, the boundaries of the future tile surface are determined and outlined. Enough simple pencil and ruler. Under the tile, the surface must be left clean and even. If it is not like that, then alignment should be made using putty and, after drying, cover with a primer.

The glue is applied directly to the back of the tile with a spatula and without delay is fixed on the wall. Each next tile should be glued to the previous. However, some types of glue suggest applying the wall itself, but the tile must be fixed to the glue until the glue dries.

Using the building level, check the tile of each row. If irregularities are revealed, then a spatula can be trimmed with the level of tile to the perfect.

Between neighboring tiles, beacons are exhibited, which are removed after the glue completely dry out. After their removal, the seams between the rows are treated with a special lubricant.

Grouting of the seams, namely, removing excess lubrication and dirt from tiles should be done no earlier than 24 hours after 24 hours, when the glue is completely dry, and the tile is definitely not moving off when cleaning.

You may also like

© 2018-2024 EEconomic. All Rights Reserved.