Installation and care of artificial waterfall

What is a new invention that has recently appeared on the market called artificial waterfall. This is really a waterfall only in reduced sizes. It can be completely used at home, not to be afraid for such qualities as the material from which this design is made, as well as for the technique itself. The material that is used in an artificial waterfall is a stone, and only this word removes many questions, as for the technique itself, it is quite simple. A pump is arranged in the waterfall, which pumps water from the underwear of the lower part upwards and creates so does not an outline of water along a cascading staircase, which is specially cut down from the stone in accordance with the natural originals, it needs a high -quality supply of electricity, and the substation of 20 kV will help in this. Many questions also arise regarding the installation of such a design and for caring for it. As for the installation, there are no questions here, since only professionals should definitely deal with this. They will definitely be able to assemble the structure, install the waterfall in a safe place, namely at the standard distance from sockets and electrical appliances, but with leaving it should be tinned to the owner. Approximate cleaning of an artificial waterfall must be done at least once a month. First you need to drain all the water and replace it. You can use water from the tap, but do not forget about the concentration of lime in it, which either clog the pump or cover the stone with a white film, which is extremely difficult to remove from the surface of the material. It is best to use distilled water, but only at the end of all procedures. After the water is completely merged, the stones must be wiped with an ordinary dry rag without using chemistry. Then floods water and you can safely continue to use the artificial waterfall.