Windows bars perform not only a protective function, but also are a way of forming a facade. There are two ways to install windows for windows. First – installation of an update to the window opening. The second – installation in the ends of the opening. Both installation options are a very complex process, so an ordinary person cannot do without familiarization with the instructions and tips. Our article will help you understand the types of window gratings, as well as gain knowledge about their installation.
Window nets (lattices) by the method of fastening are distinguished by stationary (not extended), swing (one or two wings opens), sliding (made by the type of pantograph – a hinge parallelogram of the sliding type), as well as removable (mounted in the inter -penal opening, and the mesh is designed attaches to the wall with screwing bolts).
The greatest reliability is in-arms of the forged decorative, but they have one very big minus-in force majeure situations (fire, gas leak, etc.n) through them it will not be possible to get out. If you still decide to install just this type, then leave, at least one opening under the hinged look of the grid in order to protect yourself in case of disaster.
The sliding grill will serve you a “rescue circle” in the event of any emergency. But this type of grid has certain disadvantages: because of the material used in manufacture, it loses its rigidity and its protective functions, and some varieties can only be attached inside the room.
After you have chosen a variety of fastening, it is necessary to decide from which profile the grille will be made: from the square (a metal semi -finished section of the square section), a bar (a long metal semi -finished product with a rectangular, round, trapezoidal, oval, segmented or hexagonal section), stripes, stripes (metal square with a rectangular cross section) or from a combined profile. After choosing the profile, you need to choose the right pattern. In this choice, the owner of the home is given complete freedom of choice and imagination.
The installation process for an unprepared person can represent a difficulty, but in fact there is nothing complicated here. Any grill is attached using rods from rods. At the very beginning of the installation, you need to put the lattice in the existing opening, and mark the welding places for the pins. After measuring, it is necessary to drill the marked holes into which the pins will be inserted by using a drill with a perforator. It is important to choose the size of the drill that matches the diameter of the pins. The next step is to install the grate in its place, as well as in drilled holes. Next, the grate should be welded to prepared pins.
Small exception is swing grilles – the installation process of this species is a little more complicated. In the case of choosing this type of grille, you need to make two sash, weld the canopies, cut the lock or make ears under it. The subsequent installation process is no different from the aforementioned.