Outfitting a furnace in the house.
The stove is laid out using red or refractory brick, well -burned and correct shape. Shamot brick is used to lay out the fuel and heating chamber. In front of Klaka, the brick must be moistened, for this it can be immersed in water for several minutes. Shamotnaya, just rinse from dust.
Before starting work, it is necessary to carefully study the drawing documentation, returning to it during the construction until the end of work.
The base of a conventional furnace, like Finnish furnaces for a bath, consists of three brick rows or concrete formwork, which are laid below the floor level.
Also at least two rows are laid out from floor to gas. The entire layout must be carried out strictly along the coal. It is better to use a plumb line.
When the brick is laid between the racks, the latter is put directly near the rack, as a result, clay slides, which entails the uneven seam and affects its density. To avoid this, brick is inserted obliquely. As a result, when aligning brick, clay will disperse evenly at the seam. It is best to use at a rack in opposite corners, starting masonry from them. Two other corners lay out on a plumb line.
In the process of laying, due attention should be paid to the rules. Horizontal rows, especially the places of strong heating, are strictly prohibited to reinforce. The exception may be arches and arches. The remaining cracks must be covered with clay. The thickness of the seams should not exceed 0.5 centimeters, otherwise, as a result of clay crushing, cracks will reappear.
And remember, when laying out the furnace, you should not rely on the rules regarding the brickwork of the buildings.