Many novice builders do not know how to lay out even walls of brick, how to put a brick facing and much more, without which you cannot build a house of your dreams. The facing brick is used to improve thermal insulation qualities of the future house, as well as for its decorative decoration. Such a brick is laid, like ordinary brick, but in order to avoid various defects of the cladding, you should carefully treat facing work, such as the right choice of stone rocks, complete constructive study and refinement of surfaces for facing.
The rocks of the stone are selected depending on what you plan to finish. For example, lining the porch, basements, terraces and walls cannot be made of breeds such as limestones and dolomites. Under the influence of snow and moisture, such a cladding will quickly collapse. When laying bricks for cladding, weather conditions should be taken into account. It is advisable to work in warm, dry weather, not less than +5 °, at lower temperatures and late frosts the solution will unevenly freeze. Before laying a brick, do not forget to moisten it with water. This increases the clutch of the surface of the bricks and improves the reliability. The solution is prepared from cement, sifted sand and water, achieving not too liquid consistency. Because a very liquid solution will fill the entire void in the brick, and the seams will be filled out unequally, and besides, the solution of the solution will significantly increase. You can use ready -made special mixtures, which should only be diluted with water in the right ratio.
The facing brick has a smooth or curly surface that simulates natural stone or broken brick. Experienced masons to obtain the same, even seam, lay a series of facing bricks, and then put metal rods of the desired diameter on it and fill the space between the rods with the solution. The next row of bricks is placed on this solution, and as soon as the solution grabs, the rods are removed. Seams can be 12-20 mm thick. After the end of the facing masonry, the laid out rows to protect against rain must be covered with polyethylene or any other moisture-proof material. Until completely hardening, the masonry is also protected from direct sunlight. After all the masonry is completely freezed, the final sealing of the seams is performed and the walls are cleaned from excess solution. If you do everything carefully and correctly, the lining the lining miraculously transforms your home beyond recognition.
You can skip the recording and leave a comment. Link placement is prohibited.