Since staining is recognized to this day as a widespread decoration option, the technology of its conduct should be known to any owner of the home. Even if, when the walls or ceiling is put in order, putty or plaster was used, still in the end you have to paint the surface. What conditions should be provided, so that in the end the result is especially good?
The most serious negative feature of staining can be considered that as a result of its implementation, there is no masking of the deficiencies available on the surface. That is, if there were some negative features on the ceiling or walls, then they will eventually become very noticeable. This means that before the most staining, it is necessary to eliminate the shortcomings present.
They can include irregularities, cracks, some old spots. If the stain cannot be washed off, you will have to scrap it directly with the material on which it arose. Cracks must be plastered separately. Sometimes it is useful to pre -expand cracks first, then to refuel a certain amount of solution in them. As a result, it is possible to achieve a good effect.
Alignment is usually the most difficult to carry out. Even on condition that the height changes are not too large, there are still many problems. To achieve an effect that would not disappoint, it will only be possible when applying a primer as a material that is previously applied to the surface so that the moisture absorption is less. Next, the surface is covered with plaster.
You can use putty, but it will cost more. Only after the leveling layer of plaster dries, it will be possible to begin staining. If by this moment there are irregularities, they will need to be wiped with a skin.
If you are interested in a high -quality pumping station for a summer residence, then see the offers on Aquagroup. Pumping stations for water supply are designed to automate the process of lifting water from the source, delivery to the house and control its consumption.
You can skip the recording and leave a comment. Link placement is prohibited.